กก  
PRO-FILM CONCENTRATE
PRO-FILM RTU		  
  
Evaporation retarders and finishing aids
  
Compliances
Federal EPA V.O.C.
California V.O.C.
 

Download this catalog page (116 kb PDF)

Download the MSDS for Pro-Film RTU (14.4 kb PDF) or Pro-Film Concentrate (14.4 kb PDF)

Get the free Adobe Acrobat Reader


Features
  • Retains surface moisture in all types of concrete flatwork
  • Helps prevent plastic shrinkage cracking
  • Reduces wind crusting of flatwork surfaces
  • No effect on curing compounds and other floor toppings
  • Useful as finishing aid during troweling operations
  • Can be used on interior and exterior concrete surfaces
  • Easy and beneficial to use
  • Total compatibility with fresh concrete
  • Ideal finishing aid for epoxy tools
Description
PRO-FILM CONCENTRATE and PRO-FILM RTU (ready to use) are designed to reduce surface moisture evaporation on all types of concrete flatwork. PRO-FILM is effective in conditions where rapid drying occurs, such as high winds, low humidity and high temperatures.

Applied before finishing, it reduces the potential of plastic shrinkage cracks by retaining mix water.
Usage
  • Floors and pavement
  • Parking garages and decks
  • Concrete containing fly ash
  • Dry shake floors
  • Condensed silica fume concrete

Coverage
PRO-FILM CONCENTRATE: 1 gal./3.8 L mixed with 10 gal./38 L water will cover approximately 4,400-6,600 sq. ft./405-607 sq m.
PRO-FILM RTU: 1 gal./3.8 L will cover approximately 400-600 sq. ft./37-55 sq. m.
Weather conditions and concrete texture will effect application rate.

  
Application
PRO-FILM RTU is mixed and ready to use. Mix PRO-FILM CONCENTRATE in the ratio of 1 gal./3.8 L PRO-FILM CONCENTRATE to 10 gal./38 L water. Mix thoroughly. Do not apply in concentrated form.

Use hand pump sprayer capable of spraying in a fine mist. Spray after bullfloating operation is completed. Additional applications may be necessary in extreme drying conditions. After finishing, always apply a quality UNITEX curing compound.

Clean equipment with soap and water.
Cautions
  • Follow proper dilution rate.
  • Apply only as fine spray.
  • NOT to be used as a curing compound.
  • Reduces evaporation only when concrete is in plastic state.
  • Water base product - PROTECT FROM FREEZING.
  • Do not apply on hardened concrete. Will stain!
  • Always perform test pour on colored concrete.
  • FOR INDUSTRIAL USE ONLY!
  • KEEP OUT OF REACH OF CHILDREN
 
Packaging
1 gal./3.8 L (six per case)
5 gal./18.9 L pails
55 gal./208.2 L drums
 
  ©2000-2003 Unitex | mail@unitex-chemicals.com | Internet Disclaimer | Warranty Disclaimer