|
|
|
|
Anchoring
|
|
- Permitted for use in wet or damp holes, severe weathering locations
- Freeze-thaw resistant
- Suitable for seismic conditions
- Allowed at close edge distances, shallow embedments
- Low odor
High-strength, two-component epoxy adhesive anchoring gel for both solid and
hollow-base materials. PRO-POXY 300 meets ASTM-C-881, Types I, II, IV and V, Grade 3,
Classes B and C. PRO-POXY 300 FAST meets ASTM-C-881, Types I, II, IV and V, Grade 3,
Classes A, B and C (except gel time on Types II & V). VOC compliant, meets ICC/ICBO-ER
5000, passed ICC/
ICBO-ES AC58 (Sec. 5.3.3) ASTM E 1512 (Sec. 7.1 & 7.5) Elevated
Temperature Creep Test. Meets USDA specifications for use in food processing areas.
|
|
|
|
- Easy to mix - 1:1 ratio
- Paste for vertical and overhead application
- Moisture-insensitive, thixotropic
A solvent-free, moisture-insensitive, two-component, 100% solids structural paste adhesive, it meets ASTM-C-881 Types I, II, IV & V, Grade 3, Classes B & C. It also meets USDA specifications for use in food processing areas. Ideal for cap sealing and port setting prior to injection repair.
|
|
|
|
- Works below 0°F, guns to -5°F
- Sets up in water-filled holes
- STYRENE FREE!
- Meets performance requirements of ASTM-C-881, Types I, II*, IV & V*, Classes A, B & C, Grade 3 (*with exception of gel time)
A 100% solids, solvent-free structural epoxy acrylate hybrid anchoring gel. Using the latest technology, PRO-POXY 400 has been engineered to gun at -5¡F, set up quickly in damp and water-filled holes and attain high early strength. (Hand guns are recommended only for temperatures above 20°F. Pneumatic guns provide efficiency any time and are essential for product temperatures below 20°F.)
|
|
|
|
- 100% waterproof – will not deteriorate with exposure to water
- Consistent – strict quality control testing and standards
- Strong – attains higher strength than surrounding concrete
- Non-shrink, non-metallic, non-corrosive
- Performance – expands to lock into place
- Fast setting, pourable
- Resists freeze/thaw cycles
A rapid-setting, early strength, pourable anchoring cement. It is formulated with cement based expansive compounds designed to reach final set in 20 minutes, and exceed the strength of concrete in 1 day. ANCHORING CEMENT is non-corrosive, non-rusting and 100% waterproof. This product does not contain any material that can be affected by continued exposure to water.
|
|
|
|
|
|
|
