|
|
|
|
Form Releasing
|
|
- VOC-compliant, pleasantly scented
- Waterproofs forms, prevents rotting
- No staining, discoloration or pitting
- Reduces maintenance costs 50% on metal forms
- Should not be over-applied - saves material costs
A chemical release for concrete forms that effectively prevents bonding of concrete to steel, aluminum, plywood or composite forms. Composed of organic chemicals that react with the concrete to prevent adhesion and provide a quick and easy release. Pleasantly scented and free of kerosene, Q-2 FORM RELEASE is a thin amber liquid that remains fluid at subfreezing temperatures and can be stored indefinitely.
|
|
|
|
- Temperature-insensitive – keeps working regardless of ambient temperature
- Superior clinging power, even on aluminum and steel forms
- Nonstaining, nonflammable
A higher viscosity chemical form release ideally suited for hotter weather and more porous substrates. Will also hang better aluminum or steel in hot weather. Chemical releasing properties allow very thin applications. When applied according to our directions, will not stain concrete or cause bondability problems. Contains no silicones or waxes.
|
|
|
|
- Effectively prevents bonding of concrete to the form
- Reduces the costly expense of cleaning forms and minimizes preparation for re-use
- Increase the life of both wood and steel forms
- Waterproofs plywood and helps prevent deterioration and corrosion of steel
- Non-staining, leaves no residue, free of kerosene
- Eliminates the need to sandblast before plastering
For use on steel, aluminum, plywood or composition forms. Composed of organic chemicals that react with the concrete to prevent adhesion and provide a quick and easy release without staining, discoloration or pitting. Leaves no residue or concrete dust on concrete surface. Concrete is left with architectural surface or ready for application of curing compound or sealer, or bondable for plaster, mastics, paint, etc.
|
|
|
|
- Does not impair bonding of paint and other concrete surface coatings
- Cement and plaster will not adhere, and the easily cleaned surface will be bright
- Compatible with oil on or in wooden forms, will not wash off
- Won't stain white or grey concrete
- Triples life of wooden forms, eliminates damaging and expensive form cleaning
When used in accordance with our instructions, will not stain gray or white concrete and will not impair the natural bonding of paints, plaster, epoxies, adhesives or other coatings. A very thin film assures a positive release and leaves an unstained architectural surface glaze. Paving machine mixers, dry-mix trucks and spreader-finishers can be cleaned in a minimum amount of time if sprayed daily.
|
|
|
|
- Architectural concrete surfaces remain free from stain, residue, surface glaze
and stripping damage
- Costs less than form oils due to a 600% increase in coverage rate – goes 300-400%
farther
- Won't stain white or grey concrete
- Eliminates prying, causes little or no cleanup time on forms
- Contains wood preservatives, so repeated use gradually waterproofs forms, increasing their life by two to three times
Reacts instantly on contact with concrete to prevent bonding to all types of forms. Especially formulated for use on aluminum forms, as well as steel, plastic and plywood.
|
|
|
|
- Organic, biodegradable, environmentally friendly
- No petroleum – odorless, nonstaining
- VOC compliant
- Ready to use
An innovative, 100% natural organic chemical release agent – ideal for sensitive environmental situations, such as bridge formwork over rivers and streams, or potable water reservoirs. Provides quick, easy release and leave an architectural bondable concrete surface.
|
|
|
|
|
|
|
