Farm Fresh
 

 

 

 


            DOWNLOADS:


 

 

Farm Fresh™ XL is an economical V.O.C. compliant, concrete

form release agent. Farm Fresh™ XL works to ensure clean,

positive release on plywood, fiberglass, aluminum, steel,

urethane and other concrete forming materials and form liners.

This product acts as a barrier to the adhesion of concrete while

minimizing surface dusting. Properly applied, Farm Fresh™ XL

will not stain concrete or interfere with the adhesion of coatings.

 

 

 

 

Compliances

Corps of Engineers CEGS-03300, Section 10.8 Form Coating

Navy Dock and Piers 56359

Zero VOC

GreenSpec listed

Tested to and certified aganst NSF/ANSI 61 by WQA

Features

Organic, biodegradable

No petroleum

Environmentally friendly

VOC compliant

Ready to use

Odorless, non-staining

Innovative, reliable, guaranteed

Usage

 Farm Fresh™ XL works to ensure clean, positive release on

plywood, fiberglass, aluminum, steel, urethane and other

concrete forming materials and form liners.

 

Steel, Aluminum, Plastic and High Density Plywood:

1,000-1,500 sq. ft./gal.

24.5-36.7 sq. m/L

Medium Density Plywood, Paper Column Forms:

1,000-1,250 sq. ft./gal.

24.5-30.6 sq. m/L

BB Grade Plywood:

1,000 sq. ft./gal.

24.5 sq. m/L

Rough Sawn Lumber, Striated Plywood:

First use, two coats: 500 sq. ft./gal./coat

12 sq. m/L/coat

Subsequent uses: 1,000 sq. ft./gal.

24.5 sq. m/L

 

Application

STIR BEFORE USE. Apply in thin film for maximum protection and economy. Spread uniformly with cross spray to avoid pin holes and uncoated areas. Puddles should be wiped up with squeegee or rag prior to use of forms. Prior to coating plywood forms, apply one or two heavy brush coats to edges for waterproofing protection.

 

SURFACE PREPARATION

Forms and equipment should be free from dirt, hardened concrete and foreign matter.

METHOD

For best results, lightly fog FARM FRESH using Unitex Scotchman atomizing spray tip.

 

Limitations

For subsequent coatings over concrete, follow recommended application procedures by paint and coating manufacturers.

When any material is to be applied on top of the concrete, follow the application instructions of the manufacturer.

Protect from freezing.

Packaging

5 gal./18.9 L pails

55 gal./208 L drums

Cleanup

Sprayers and other application equipment can be cleaned with water.

 
Unitex in the News
Modern Contractor Solutions October 2008
Epoxy Polymer Extends Life For World's Longest Covered Bridge It’s a smoother and safer ride for motorists crossing over the Hartland Covered Bridge in Hartland, New Brunswick, Canada—the world’s longest covered bridge. The bridge deck has been covered with an epoxy polymer overlay from Unitex.
Bugle Observer (Canada) 9/16/08
by Shawn Merrithew Bridge closed again, repairs continue ... She said the polymer should enhance the 107-year-old bridge's lifespan. Developed by Unitex Chemicals, the epoxy polymer overlay is more flexible and more corrosion-resistant than asphalt, says Unitex president John Grissinger...
Roads & Bridges March 2008
by Jerry Byrne The spread defense: Crews save significant time and maintenance costs with overlay in Kansas The last time Wildcat Construction Co. repaired the I-135 bridge in Wichita, Kan., more than 20 years ago, it took nearly two years, and lanes were closed or diverted both day and nigh
Modern Contractor Solutions November 2007
By Rebekah Rosenfeld Kansas bridge polymer surface project is largest in United States. When it came time to resurface the concrete on a portion of one of I-135’s expressways in Wichita, the Kansas Department of Transportation (KDOT) decided to repair the 1.76 million square feet using epoxy.